1.4 General Procedure in Machine Design
In designing a machine component, there is no rigid rule. The
problem may be attempted in several ways. However, the general
procedure to solve a design problem is as follows :
1. Recognition of need. First of all, make a complete statement
of the problem, indicating the need, aim or purpose for which the
machine is to be designed.
2. Synthesis (Mechanisms). Select the possible mechanism or
group of mechanisms which will give the desired motion.
3. Analysis of forces. Find the forces acting on each member
of the machine and the energy transmitted by each member.
4. Material selection. Select the material best suited for each
member of the machine.
5. Design of elements (Size and Stresses). Find the size of
each member of the machine by considering the force acting on the
member and the permissible stresses for the material used. It should
be kept in mind that each member should not deflect or deform than
the permissible limit.
6. Modification. Modify the size of the member to agree with
the past experience and judgment to facilitate manufacture. The
modification may also be necessary by consideration of manufacturing
to reduce overall cost.
7. Detailed drawing. Draw the detailed drawing of each component and the assembly of the
machine with complete specification for the manufacturing processes suggested.
8. Production. The component, as per the drawing, is manufactured in the workshop.